Diamond cutting disc 125x22.22x20x1.9mm 1A1R 125 PRO Gres

Diamond cutting disc 125x22.22x20x1.9mm 1A1R 125 PRO Gres

• Disc diameter 125 mm.
• Mounting hole diameter 22․22mm.
• The depth of the blade: 20 mm diamond.
• Disc thickness 1.9 mm.
• Maximum rotation speed 12250 rpm.
• Maximum speed 80 m/s.
• Works at 45°
  
• Cooling: Without cooling.
• Materials for use: Ceramics, Porcelain tiles.
• Packed in a color box.

125 PRO Gres

Disc/milling cutter. Cut and grind!

When processing ceramic tiles and porcelain tiles, you often need to quickly switch from cutting to grinding. Changing the disc to the milling cutter and vice versa takes a lot of time, and using an additional angle grinder is inconvenient. Having a tool with two functions on one grinder is a great solution!

The 1A1R PRO Gres milling disc has a wide 20 mm diamond-bearing layer on the front side. In addition to cutting, the wide layer allows you to effectively grind the end of the tile, grind irregularities, and perform curvilinear cutting.

The disc is especially effective when cutting tiles at 45 degrees, performing the "mitering" operation. The diamond-bearing layer additionally grinds the edge after cutting, forming a clean surface.

The disc works great together with the Slider 45 MECHANIC angle grinder attachment for cutting at 45 degrees. It is manufactured with an outer diameter of 125 mm, with a seat of 22.2 mm. It is used on an angle grinder 125 without the use of cooling.

Vertical - speed (running meters/min), horizontal - edge quality

The data are given under the following conditions:

• porcelain stoneware, 10 mm;

• Ø 125 mm;

• serviceable angle grinder with a power of 1.4 kW, with a rotation speed of 11,000 rpm;

• air temperature +25 C°.

The data is for reference only. Under other operating conditions, the performance parameters may differ significantly

/ # / — Edge quality

/ 3 / — Average

/ 4 / — Good

/ 5 / — Excellent