Gypsum Filler FORMULA 25kg

APPLICATION

Designed for leveling walls and ceilings of interior spaces under normal humidity conditions. Suitable for surfaces covered with gypsum, concrete, lime, cement-lime, cement-lime-sand, gypsum plasterboards, and gypsum-fiber panels, as well as coarse-grained plastered surfaces. Provides a perfectly smooth surface that serves as a reliable base for subsequent finishing works — painting, wallpapering, or applying decorative coatings.Application is possible both manually and by machine.Eco-friendly, does not contain dangerous or harmful substances.

BASE PREPARATION

Clean the substrate from dirt, dust, oils and paint residues , as well as any peeling elements. Before starting the work, if necessary, the substrate must be treated with “Grunt Acrylic Formula” primer. The substrate must have sufficient load-bearing capacity. Deformable frame-type substrates (boxes, partitions, etc.) made of gypsum plasterboard and gypsum fiber board must have high rigidity.

MIX PREPARATION

Gradually add 1 kg of dry mix into 0.45-0.5 l of clean water and mix with a mixer until a homogeneous, lump-free mass is obtained. Allow the prepared compound to stand for 5 minutes, then remix for about 1 minute — after that it is ready for use. For filling cracks and holes, the amount of water should be reduced, while for plastering the standard ratio should be used. Recommended layer thickness: 0.3–5
mm. Consumption: 1 kg of the mix is sufficient to cover 1 m² of surface with a 1 mm thick layer. The pot life of the prepared mix is 60 minutes.
Execution of work
Apply the prepared mixture onto to the pre-prepared surface using a spatula. For larger cracks or holes, fill with putty and level with a wide metal spatula. Smooth the surface with a sponge or cloth. Final finishing should be done with sandpaper after the surface has completely dried.

SAFETY MEASURES AND STORAGE CONDITIONS

Store bags of dry mixture covered in dry, well-ventilated,rooms, ensuring the integrity of the packaging and protection against moisture. Shelf life in original packaging – 12 months from the manufacturing date, at temperatures between -30°C- +30°C and relative humidity up to 75% under proper storage and transportation conditions.During work, protective gloves, goggles, and respiratory protective equipment must be used. Avoid contact of the mixture with skin and eyes. In case of eye contact, rinse immediately with plenty of clean water. Keep out of reach of children!