Finishing putty 30kg TSIATSAN
Purpose: "Tsiyatsan" finishing putty is used before decorative finishing for the purpose of final plastering of small cracks and irregularities on walls and ceilings. The putty is made of chalk powder and polymer additives. It is recommended to use in dry areas. Surface preparation: the surface must be dry, solid, cleaned of paint, oil and dust. Highly absorbent surfaces must be pre-coated with a primer, and weak and crumbling surfaces must be scraped with a metal brush. Preparation of the putty: To mix 1 kg of putty, you must first pour 0.45 l of room temperature water into the container, mix with a mixer or by hand until a homogeneous mass is obtained, leave to rest for 3-5 minutes, then mix again and use within 20 minutes. In case of works on covering holes and cracks, reduce the amount of water, and in case of plastering works, increase it. Thickness of the applied layer 0.3-3 mm. Coverage: The coverage of 1.2 kg of the mixture is 1 square meter (in case of a layer with a thickness of 1 mm). Usage: carry out the work with the help of a metal spatula. First of all, fill the cracks, holes and unevenness, then spread the putty and smooth it with a thin layer. The finishing layer eliminates the smallest unevenness and usually does not require complete sanding. Storage: store in a dry environment.
Finishing putty 30kg TSIATSAN
This product qualifies for free shipping
9121 samples sold
Product Views: 1331
5,400֏
Price in reward points: 5400
-1280x853.jpg)



