Out Of Stock
Finishing Putty 5kg
Purpose: Finishing putty «TSIATSAN» is used for the final finishing of
walls and ceilings before decorative finishing, as well as for repairing
small cracks and unevenness.
The putty is made from chalk and polymer
additives. It is recommended for use in dry rooms.
Surface Preparation:
The surface should be dry, firm, and free from
paint, oil, and dust.
Highly absorbent surfaces should be pre-primed,
and weak or crumbly surfaces cleaned with a metal brush.
Putty Preparation: To prepare 1 kg of putty, add 0.45 liters of water at
room temperature, mix manually or with a mixer until a homogeneous mass
is obtained. Let it sit for 3-5 minutes, then mix again and use within
20 minutes.
To fill cracks and holes, reduce the amount of water; for
puttying, increase it. The layer thickness should be from 0.3 to 3 mm.
Coverage: The coverage is approximately 1.2 kg of mix per 1 m² with a 1
mm layer thickness.
Application: Work is done with a metal spatula.
First, fill in cracks,
holes, and unevenness, then distribute the putty in a thin layer and
smooth it out. The final layer eliminates even the smallest
irregularities, usually without requiring full sanding.
Storage: Store in a dry place.
Finishing Putty 5kg
This product qualifies for free shipping
920 samples sold
Product Views: 792
1,300֏
Price in reward points: 1300
-1280x853.jpg)



