Diamond drill bit - Ceramic tile/ Porcelain tiles Baumesser DDR-V 10x30xS10 Keramik Pro 910278018045

Diamond drill bit - Ceramic tile/ Porcelain tiles Baumesser DDR-V 10x30xS10 Keramik Pro 910278018045

• Drilling diameter: 10 mm.
• Drilling tip type: cylindrical.
• Shank type: S10.
• Length: 30 mm.
• Cooling: without cooling.
• Materials for use: Ceramic tile, Porcelain tiles ․
• Compatible with drill, screwdriver.
• Packaged in a colored box.

Every year the range of hard, frost-resistant porcelain stoneware is expanding, the processing of which is becoming more and more difficult. For cutting and drilling such materials, a high-speed tool is needed.

Baumesser Keramik Pro vacuum drills are high-speed drills for any type of ceramics and porcelain stoneware. High-strength diamond, fixed in a hard bond, forms developed cutting microcutters that are effectively embedded in the ceramic material.

Drills with an S10 shank are used for drills, hammer drills in non-impact mode and screwdrivers.

The average drilling speed of 10 mm porcelain stoneware with a 35 mm drill on a drill is 20 sec (10-40 sec depending on the hardness of the material and drilling modes). The resource is 30-100 holes.

Chuck clamping diameter: not less than 12 mm

For best results, it is recommended to set the maximum speed.