-1280x853.jpg)
Diamond cutting disc DISTAR 14315129010 1A1RSS/C3-H 125x2.2/1,4x11x22,23-10
- Disc diameter 125 mm.
- Mounting hole diameter 22․22mm.
- The depth of the blade: 11 mm diamond․
- Disc thickness 1․4/2.2 mm.
- Maximum rotation speed 12250 rpm.
- Maximum speed 80 m/s.
- Cooling: Without cooling.
- For dry cutting․
- Materials for use: granite, reinforced concrete, paving slabs, unreinforced concrete, sandstone, marble, brick.
- Packed in a color box.
The outer diameter is 125 mm, and the mounting hole is 22.2 mm. The disc is turbocharged, designed only for dry cutting. The disc is used for a wide range of construction work, as it is multifunctional. You can cut concrete, brick, paving slabs, reinforced concrete and all types of granite (including colored).
The 1A1RSS 125 Universal turbo segment disc goes well with tabletop machines and hand tools. It can only be used for dry cutting, otherwise the disc will quickly become unsuitable for work. The disc is for household use, but has good reinforcement penetration, service life and high cutting speed. The disc has an increased service life, which is explained by its universal ability and compatibility with many building materials.
Distinctive features of the 1A1RSS 125 Universal diamond cutting disc: The disc is universal, designed for a wide range of materials; Increased cutting speed and low resource consumption; Cutting without coolant; Any type of granite can be cut. There are special grooves in the form of stripes on individual segments of the disc, they are designed to remove dust and increase the efficiency factor.
The thickness of the diamond edge is 2.2 mm, in some models it reaches 1.8 mm. The disc cannot be used to cut fireclay brick, fresh and highly reinforced concrete. The diamond wheel has a high level of stability under heavy loads. You can cut with the Universal for 4-5 minutes without stopping. But after work, you need to stop the tool and cool the diamond surface. The operating instructions for the disc and safety precautions are included inside the package. Carefully read all the materials and only then start working!
