-1280x853.jpg)
Diamond Cutting Disc Turbo 230 mm Extra Max 10115027018
- Disc diameter: 230 mm.
- Arbor diameter: 22,23 mm.
- Blade width: 12 mm.
- Disc thickness: 2,5 mm.
- Maximum rotation speed: 6650RPM.
- Maximum speed: 80m/s.
- Cooling: without cooling.
- Materials for use: Brick, Unreinforced concrete, Paving slabs․
- Packaged in a colored box
The DISTAR TURBO EXTRA MAX diamond cutting disc is used for processing hard materials, one of the best solutions for cutting reinforced concrete and other building materials. Provides a soft, comfortable cutting. It is excellent for processing all types of bricks including refractory, sandstone, non-abrasive paving slabs.
Three rows of holes provide additional cooling of the body, the turbocharged layer effectively removes sludge from the cutting area.
The disc is capable of providing maximum reliable operation throughout its entire service life, with a sufficiently high level of productivity (up to 1.1 linear meters per minute when cutting reinforced concrete M-400).
The disk resource is about 80 linear meters in reinforced concrete M 400 for full depth.
The circle has an outer diameter of 230 millimeters, with a diamond layer thickness of 2.5 mm and a height of 12 mm. It is used on any angle grinder with a seat of 22.2 mm and a working speed of up to 6650 revolutions per minute.
Vertical - speed (running meters/min), horizontal - resource (running meters)
The data are given under the following conditions:
• concrete M400, reinforcement Ø12 mm, 6 pcs./1 running meter;
• Ø 230 mm;
• cutting depth - 6 cm;
• pendulum cutting method;
• serviceable angle grinder with a power of 2.5 kW and a rotation speed of 6500 rpm;
• air temperature +25 °C.
The data is for reference only. Under other operating conditions, the performance parameters may differ significantly.
