Diamond Disc 200 mm Distar Hard ceramics 11120048015

Diamond Disc 200 mm Distar Hard ceramics 11120048015

• Disc diameter: 200 mm.
• Arbor diameter: 25.4 mm.
• Blade width: 10 mm.
• Disc thickness: 1.6 mm.
• Maximum rotation speed: 3050 RPM.
• Maximum speed: 32 m/s.
• Cooling: wet cut.
• Materials for use: Ceramic tile, Porcelain tiles․
• Compatible with tile cutter.
• Packaged in a colored box

The Distar Hard Ceramics diamond circle is designed for high-quality cutting of ceramic tiles with and without decorative coating, as well as granite. The cutting speed per minute is 1.1 linear meters, with a resource of 1000 cubic meters, due to its material processing resource, profitable tool operation is achieved at lower cost.

It is mostly used to work with relief glazes, wall and floor ceramics, granite, as well as all types of granite and marble in rare cases. It has a wide range of disc diameters from 115 mm to 400 mm, which is used on tile cutters with a power of 0.8 -1.5 kW with a rotation speed of 2,900 revolutions per minute. For diameters of 200-250 mm and 2-2.5 kW for 300-400 mm. At the same time, it is necessary to supply water in the amount of at least 5 liters per minute of the working process. With other indicators, performance changes significantly. Hard Ceramics can be purchased at an affordable price, for fast and clean work.

Vertically - speed (mph/min), horizontally - resource (mph)

The data is given in the conditions:

• porcelain stoneware, 10 mm;

• Ø 200 mm;

• serviceable 0.8 kW tile cutter with a rotation speed of 2900 rpm;

• water supply 6.0 l/min;

• the air temperature is +25°C.

The data is for reference. Under other operating conditions, the performance parameters may vary significantly.

/ # / — Edge quality

/ 3 / — Average

/ 4 / — Good

/ 5 / — Excellent